System5 | SPOT Multi

SPOT R100 MultiMode ThermometerSPOT R100 MultiMode Thermometer is an innovative stand-alone pyrometer design with advanced integrated processing capabilities. The latest technologies utilised in SPOT R100 MultiMode make non-contact temperature measurement accurate, flexible and easy to use.

Combining Ethernet, Modbus TCP, Video, Analog and Alarm Outputs within one device, SPOT makes all these conveniently available to the operator. Pyrometer readings and configuration settings are available on the rear display and remotely via a web browser or through SPOT Viewer software.

Motorized focus – SPOT features both local and remote adjustment.

Flexible design with adapters provide simplified installation and easy replacement of older thermometers. SPOT is designed to be interchangeable with existing fixed spot pyrometers.

A valuable addition – LAND SPOTViewer software allows you to configure, display and log data from up to 254 different thermometer locations. To ensure security with multiple users, various levels of access are available. Data log frequency, file size, save and Archive locations are all configurable.

SPOTViewer is the perfect choice for smaller operations where advanced process control systems may be absent.

SPOT R100 MultiMode Thermometer has Five Operating Modes

The SPOT R100 offers different operating modes selectable from the set-up menu:

  • Ratio: Short wavelength ratio – with signal strength output
  • Mono 1: Shorter wavelength, medium to high temperatures
  • Mono 2: Longer wavelength, low to medium temperatures
  • Multi: Extended range – Ratio in the mid and high range, with low temperature monochromatic with Emissivity correction
  • Duo: Extended range – Mono 2 at low temperatures, Mono 1 at high temperatures, using a combination of the two at medium temperatures

SPOT R100 MultiMode Specifications

5 Operating range Ratio: 550 – 1800°C
Detector 1 : 550 – 1800°C
Detector 2 : 400 – 1800°C
Duo: 400 – 1800°C
Multi: 400 – 1800°C
Uncertaunty Detector 1 and 2 modes ±0.25%
All other modes ±0.50%
Repatability <1°C
Resolution <0.1°C
Detector Type Detector 1: 1.0 µm
Detector 2: 1.2 µm
All other Modes: short wavelenght
Response time: Adjustable 1ms to 10s
Field of View 230:1 (90%)

SPOT R100 MultiMode Standard Specifications

Focus Range 300mm to infinity, locally or remotely adjustable using the web server or SPOT Viewer software
Processing Functions Averaging, Peak/Valley Picking, Mode Master, Background Compensation
Power Requirement Power over Ethernet or 24V DC
Display Local display with video and thermometer reading and settings
Interfaces
Outputs 0-20mA, 4-20mA, 24V DC, Ethernet (Modbus TCP-IP)
Inputs 24V DC, Ethernet (Modbus TCP-IP)
Settings Configurable locally (using the thermometer interface) or remotely (using the Webserver or SPOT Viewer) Emissivity, mode, current output range, alarm logic output and thresholds, network settings, focus and LED, language and user name
Software Live configuration and temperature display on any web browser.
Optional SPOTViewer software with datalogging, live and historical data trending
Languages Integrated multiple language selection
Ambient Temp Range Before cooling required 5-60°C specified, 0-70°C operating
Sighting Integrated video with local display and remote image capture using the SPOT Viewer software
Sighting with patented pulsed Green LED focus pattern confirmation
Sealing IP65 / NEMA 4 – when both connectors fitted
Mounting 56mm x 1.5mm thread or various protective SPOT mountings
Warranty 36 months

Land System 5 Spot R100 Overview

 

Land System 5 Spot R100 Overview 2

 

  System5 SPOT R100 MultiMode Brochure
SPOT R100 MultiMode Website

SPOT Thermometers

Multi-Wavelength Models

  • R100 standard body and Fibre-optic models

    The R100 and F.O. version use two wavelengths, 1 and 1.2µm. All settings are selectable using the local user interface or  remotely via a Web browser or SPOT Viewer software. Fibre-optic models use a red LED for target alignment. Minimum target size is 1.5mm @ 300mm distance – standard body variant only.  Five choices of measurement modes are available, from monochromatic, Ratio (2-color) to combined wavelength models.

    Instrument R100 R100 F.O.
    Measurement Range 550-1800 °C / 1022-3272 °F (ratio mode) 400-1800 °C / 752-3272 °F (overall)
    Field of View 200:1 to 90% of energy 100:1 to 90% of energy
    Detector Type 2 wavelengths; Detector 1: 1.0 µm; Detector 2: 1.2 µm
    Sighting Image Local display and remote image capture Not applicable
    Focus Range Motorized, 300 mm to infinity, locally or remotely adjusted 100 mm to 500mm manually adjusted
    LED Targeting Patented pulsed Green LED targeting pattern Red circle LED exactly defines the target spot location and size
    Applications Iron & Steel / Hot Rolling Mill / Rod/Bar / Cement or Lime Poly-silicon / Forging / Heat Treating
    R100
  • R160 standard body and Fibre-optic models

    The R160 and F.O. version uses two wavelengths 1 and 1.5µm. All settings are selectable using the local user interface or remotely via a web browser or SPOT Viewer software. Fibre-optic models use a red LED for target alignment. Minimum target size is 1.5mm @ 300mm distance – standard body variant only

    Instrument R160 R160 F.O.
    Measurement Range 550-1600 °C / 1022-2912 °F (ratio mode) 250-1600 °C / 482-2912 °F (overall)
    Field of View 200:1 to 90% of energy 100:1 to 90%; 3 lengths of light guides available 3, 6 and 10 m / 10, 20 and 33 ft.
    Detector Type 2 wavelengths; Detector 1: 1.0 µm; Detector 2: 1.5 µm
    Sighting Image Local display and remote image capture Not applicable
    Focus Range Motorized, 300 mm to infinity, locally or remotely adjusted 100 mm to 500mm manually adjusted
    LED Targeting Patented pulsed Green LED targeting pattern Red circle LED exactly defines the target spot location and size
    Applications Heat Treating Heat Treating
    R160

Standard Spec for all models

Standard Fibre Optic
Display Local display with image streaming and thermometer readings and settings Local display with thermometer readings and settings
Settings Configure locally using the thermometer interface or remotely (using the Webserver or SPOT Viewer). Emissivity, mode, current output range, alarm logic output and thresholds, network settings, focus and LED, language and user name (focus and LED on standard body only)
Sighting Image Local display and remote image capture Not applicable
Mounting Full range of mountings/accessories available – see Mountings & Accessories brochure or visit our website
Repeatability <1°C
Resolution 0.1 °C
Noise <0.5 °C RMS *
Sealing IP65
Response Time Adjustable 1ms to 10 s
Interfaces 0-20 mA DC or 4-20 m A DC, Digital CMD In and CMD Out, Ethernet (TCP-IP, Modbus TCP, DHCP, http, udp, ICMP)
Processing Functions Peak/Valley Picking, Average, Mode master, CMD in sampling, CMD Out alarms
Power Requirement Power over Ethernet or 24 V DC
Software Live configuration and temperature display on any web browser. Optional SPOT Viewer software with datalogging, live and historical data trending plus remote image capture; control of multiple instruments (Image capture not available on Fiber-optic version)
Languages Integrated multiple language selections
Ambient Temp Range 5-60 °C specified, 0-70 °C operating Optic head up to 200 °C / 392 °F before cooling required
Inputs 24 V DC, CMD In, Ethernet, (TCP-IP, Modbus TCP, DHCP, http, udp, ICMP)
Outputs 0-20 mA, 4-20 mA, CMD Out relay, Ethernet (TCP-IP, Modbus TCP, DHCP, http, udp, ICMP)
Warranty 36 months

*Measurements within specification over 5-95% of range

Comments are closed.